3d scanning in Barking

Yes. We scan the part to 0.04 mm and rebuild it as editable CAD, so it can be understood, adapted, developed around or reproduced. For a Barking builder it turns a physical component with no drawings into workable geometry, whether for a bespoke build, a modification, or to reproduce a part that is no longer available, within our non-critical remit.

No. We do the engineering, reverse engineering and non-safety-critical parts, but not brakes, steering, suspension, structural or other safety-critical components; those need proper certified parts. For a Barking project it means fast help with development, prototyping and non-critical parts, and we are straight about exactly where that line is drawn.

Yes. We print non-structural prototype parts, brackets, housings, ducting, covers and fit-check pieces, so a design can be tested and refined before committing to metal. For a Barking engineer it makes development quick and cheap, iterating a printed part until it is right, then supplying CAD to have the final version machined or cast.

Where a component should be metal, we supply the scan or developed design as CAD for machining or casting, so the finished part is made in the right material. We use the print stage for development and non-critical parts, and route production metal parts to the proper process. For a Barking build it keeps development fast without pretending a print is a metal part.

Often, for non-critical parts. Older and classic vehicles are exactly where components stop being made, and scanning captures the part accurately for reproduction. For a Barking restorer it means a discontinued non-critical part reproduced from the original rather than hunting fruitlessly for new old stock, within the limits we are clear about.

Always. There is no minimum order, so one component is a normal job, whether for a specialist, a builder or an enthusiast. Send photos and rough dimensions, or the part itself, and we will price it clearly, usually the same day, with a typical 3 to 5 working day turnaround once we have or have scanned it.

Tooling, fixtures and production parts digitised for quality control and replacement.